LIC AE Syllabus 2020, LIC AAO Syllabus 2020 | LIC AE, AAO Syllabus

LIC AE Syllabus 2020: Life Insurance Corporation of India Ltd. (LIC) has released the official advertisement for the recruitment of Assistant Engineers (AE), Assistant Administrative Officers (AAO). This year Life Insurance Corporation of India Ltd. (LIC) recruitment exam 2020 will be conducted for 218 vacancies through general recruitment. Candidates can fill the application form of Life Insurance Corporation of India Ltd. (LIC) from February 25 2020 to March 15, 2020. Life Insurance Corporation of India Ltd. (LIC) is an Indian state-owned insurance group and investment corporation owned by the Government of India. LIC AE Syllabus 2020, LIC AE Syllabus 2020 Download, LIC AE Syllabus 2020

The Life Insurance Corporation of India Ltd. (LIC) was founded on September 1, 1956 when the Parliament of India passed the Life Insurance of India Act that nationalized the insurance industry in India. Over 245 insurance companies and provident societies were merged to create the state-owned Life Insurance Corporation of India.LIC AE Syllabus 2020

Here in this article, we are sharing LIC AE Syllabus 2020. LIC AE Syllabus 2020, LIC AAO Syllabus 2020, LIC AE 2020 Syllabus, LIC AAO 2020 Syllabus, LIC Assistant Engineer Syllabus. Check This article for LIC AE Syllabus 2020.

LIC Assistant Engineer, AAO 2020 Important Dates

Online Registration starting date 25th February 2020
Online Registration closing date 15th March 2020
Admit card Available 27th March to 04th April 2020
Preliminary examination 04th April 2020
Mains examination To be Announced Later
Result To be Announced Later

Best Current Affairs for LIC AAO, AE Exam 2020

2020 Current Affairs PDF : Click Here

2019 Current Affairs PDF : Click Here

Static GK 2020 Notes PDF : Click Here

Static GK 2019 Notes PDF : Click Here

LIC Assistant Engineer, AAO 2020 Selection Process

  • Preliminary Exam – Phase I
  • Mains Exam – Phase II
  • Interview

LIC Assistant Engineer, AAO 2020 Preliminary Exam

Sr. No. Subjects No of Question Maximum Marks Duration Medium of Exam Minimum Qualifying Marks
1. Quantitative Aptitude 35 35 20 minutes Hindi/English SC/ST/PwBD-16Others- 18
2. Reasoning Ability 35 35 20 minutes Hindi/English SC/ST/PwBD-16Others- 18
3. English Language with special emphasis on grammar, vocabulary and comprehension 30### 30 20 minutes English SC/ST/PwBD-09Others- 10
Total 100 100 60 minutes    


###
English Language test will be of qualifying nature and the marks in English Language will not be counted for ranking.

Candidates equal to 20 times of number of vacancies in each category, subject to availability, will be shortlisted for Main examination.

Best Current Affairs for LIC AAO, AE Exam 2020

2020 Current Affairs PDF : Click Here

2019 Current Affairs PDF : Click Here

Static GK 2020 Notes PDF : Click Here

Static GK 2019 Notes PDF : Click Here

LIC Assistant Engineer, AAO 2020 Mains Exam

S.No. Sections Number of questions Marks Time (Minutes) Medium of Exam Minimum Qualifying Marks
1. Reasoning Ability & Computer Aptitude 30 90 40 Hindi/English SC/ST/PwBD- 40
Others- 45
2. General
Knowledge,
Current
Affairs
30 60 20 Hindi/English SC/ST/PwBD- 27
Others- 30
3. Professional
knowledge
30 90 40 Hindi/English SC/ST/PwBD- 40
Others- 45
4. Insurance and Financial Market Awareness 30 60 20 Hindi/English SC/ST/PwBD- 27
Others- 30
Total 120 300 120 Minutes    
5. English Language (Letter writing & Essay)/ Legal drafting for AAO (Legal) 2 25## 30 English SC/ST/PwBD- 9
Others- 10

##Descriptive test of English Language etc. will be of qualifying nature and the marks in English Language will not be counted for ranking.

LIC Assistant Engineer, AAO 2020 Interview

Candidates who will qualify LIC AAO & AE Mains 2020 will have to appear for the final round i.e. Interview. Marks obtained in Main examination plus marks obtained in interview will be considered for final merit listing.

Best Current Affairs for LIC AAO, AE Exam 2020

2020 Current Affairs PDF : Click Here

2019 Current Affairs PDF : Click Here

Static GK 2020 Notes PDF : Click Here

Static GK 2019 Notes PDF : Click Here

LIC AE Syllabus, LIC AAO Syllabus

LIC AAO Syllabus (Prelims + Mains Exam):

(A) General Awareness:Questions are designed to test the candidate’s general awareness around him/her and its application to society. Questions are also designed to test his/her knowledge of current events and of such matters of everyday observation and experience in their scientific aspect as may be expected of an educated person. The test will also include questions relating to India and its neighboring countries especially pertaining to History, Culture, Geography, Indian Economy, General Polity, Indian Constitution, Scientific Research. These questions will be such that they do not require a special study of any discipline.

(B) Quantitative Aptitude: Number Systems: Computation of Whole Number, Decimal and Fractions, Relationship between numbers. Fundamental arithmetical operations: Percentages, Ratio and Proportion. Square roots, Averages, interest (Simple and Compound), Profit and Loss, Discount, Partnership Business, Mixture and Alligation, Time and distance, Time and work. Algebra: Basic algebraic identities of School Algebra and Elementary Surds (simple problems) and Graphs of Linear Equations. Geometry Familiarity with elementary geometric figures and facts: Triangle and its various kinds of centres, Congruence and similarity of triangles, Circle and its chords, tangents, angles subtended by chords of a circle, common tangents to two or more circles. Mensuration: Triangle, Quadrilaterals, Regular Polygons, Circle, Right Prism, Right Circular Cone, Right Circular Cylinder, Sphere, Hemispheres, Rectangular Parallel piped, Regular Right Pyramid with triangular or square Base. Trigonometry: Trigonometry, Trigonometric ratios, Complementary angles, Height and distances (simple problems only). Statistical Charts: Use of Tables and Graphs: Histogram, Frequency polygon, Bar-diagram. Pie-chart.

(C) General intelligence: it would include questions of both verbal and non-verbal type. The test will include questions on Semantic Analogy, Symbolic operations, Symbolic/ Number Analogy, Trends, Figural Analogy, Space Orientation, Semantic Classification, Venn Diagrams, Symbolic/ Number Classification, Drawing inferences, Figural Classification, Punched hole/ pattern-folding & unfolding, Semantic Series, Figural Pattern—folding and completion, Number Series, Embedded figures, Figural Series, Critical Thinking, Problem Solving, Emotional intelligence, Word Building, Social intelligence, Coding and de-coding.

(D) English Language: Spot the Error, Fill in the Blanks, Synonyms/ Homonyms, Antonyms, Spellings/Detecting mis-spelt words, idioms & Phrases, One word substitution, improvement of Sentences, Active/ Passive Voice of Verbs, Conversion into Direct/ indirect narration, Shuffling of Sentence parts, Shuffling of Sentences in a passage, Cloze Passage, Comprehension Passage.

Best Current Affairs for LIC AAO, AE Exam 2020

2020 Current Affairs PDF : Click Here

2019 Current Affairs PDF : Click Here

Static GK 2020 Notes PDF : Click Here

Static GK 2019 Notes PDF : Click Here

LIC AE Syllabus:

LIC AE Syllabus 2020 (Civil)

Engineering Mechanics: Force (resolution of force, moment of force, force system, composition of forces), Equilibrium, Friction, Centroid and Center of gravity, Simple machines.

Building Construction: Building components (substructure, superstructure), type of structure (load bearing, framed and composite structures).

Building Materials: Masonry materials (stones, bricks, and mortars), Timber and miscellaneous materials (glass, plastic, fiber, aluminum steel, galvanized iron, bitumen, PVC, CPVC, and PPF).

Construction of substructure: job layout, earthwork, foundation (types, dewatering, coffer dams, bearing capacity).

Construction of superstructure– stone masonry, brick masonry, Hollow concrete block masonry, composite masonry, cavity wall, doors and windows, vertical communication (stairs, lifts, escalators), scaffolding and shoring.

Building Finishes- Floors (finishes, process of laying), walls (plastering, pointing, painting) and roofs (roofing materials including RCC).

Building Maintenance– Cracks (causes, type, repairs- grouting, guniting, epoxy etc.), settlement (causes and remedial measures), and re-baring techniques.

Building Drawing: Conventions (type of lines, symbols), planning of building (principles of planning for residential and public buildings, rules and byelaws), drawings (plan, elevation, section, site plan, location plan, foundation plan, working drawing), perspective drawing.

Concrete Technology: Properties of various types/grades of cement, properties of coarse and fine aggregates, properties of concrete (water cement ratio, properties of fresh and hardened concrete), Concrete mix design, testing of concrete, quality control of concrete (batching, formwork, transportation, placing, compaction, curing, waterproofing), extreme weather concreting and chemical admixtures, properties of special concrete (ready mix, RCC, pre-stressed, fiber reinforced, precast, high performance).

Surveying: Types of survey, chain and cross staff survey (principle, ranging, triangulation, chaining, errors, finding area), compass survey (principle, bearing of line, prismatic compass, traversing, local attraction, calculation of bearings, angles and local attraction) leveling (dumpy level, recording in level book, temporary adjustment, methods of reduction of levels, classification of leveling, tilting level, auto level, sources of errors, precautions and difficulties in leveling), contouring (contour interval, characteristics, method of locating, interpolation, establishing grade contours, uses of contour maps), area and volume measurements, plane table survey (principles, setting, method), theodolite survey (components, adjustments, measurements, traversing), Tacheometric survey, curves (types, setting out), advanced survey equipment, aerial survey and remote sensing.

Computer Aided Design: CAD Software (AutoCAD, Auto Civil, 3D Max etc.), CAD commands, generation of plan, elevation, section, site plan, area statement, 3D view.

Geo Technical Engineering: Application of Geo Technical Engineering in design of foundation, pavement, earth retaining structures, earthen dams etc., physical properties of soil, permeability of soil and seepage analysis, shear strength of soil, bearing capacity of soil, compaction and stabilization of soil, site investigation and sub soil exploration.

Hydraulics: properties of fluid, hydrostatic pressure, measurement of liquid pressure in pipes, fundamentals of fluid flow, flow of liquid through pipes, flow through open channel, flow measuring devices, hydraulic machines.

Irrigation Engineering: Hydrology, investigation and reservoir planning, percolation tanks, diversion head works.

Mechanics of Structures: Stress and strain, shear force and bending moment, moment of inertia, stresses in beams, analysis of trusses, strain energy.

Theory of structures: Direct and bending stresses, slope and deflection, fixed beam, continuous beam, moment distribution method, columns.

Design of Concrete Structures: Working Stress method, Limit State method, analysis and design of singly reinforced and doubly reinforced sections, shear, bond and development length, analysis and design of T Beam, slab, axially loaded column and footings.

Design of Steel Structures: Types of sections, grades of steel, strength characteristics, IS Code, Connections, Design of tension and compression members, steel roof truss, beams, column bases.

Transportation Engineering: Railway Engineering (alignment and gauges, permanent way, railway track geometrics, branching of tracks, stations and yards, track maintenance), Bridge engineering (site selection, investigation, component parts of bridge, permanent and temporary bridges, inspection and maintenance), Tunnel engineering (classification, shape and sizes, tunnel investigation and surveying, method of tunneling in various strata, precautions, equipment, explosives, lining and ventilation).

Highway Engineering: Road Engineering, investigation for road project, geometric design of highways, construction of road pavements and materials, traffic engineering, hill roads, drainage of roads, maintenance and repair of roads.

Environmental Engineering: Environmental pollution and control, public water supply, domestic sewage, solid waste management, environmental sanitation, and plumbing.

Advanced Construction Techniques and Equipment: Fibers and plastics, artificial timber, advanced concreting methods (under water concreting, ready mix concrete, tremix concreting, special concretes), formwork, pre-fabricated construction, soil reinforcing techniques, hoisting and conveying equipment, earth moving machinery (exaction and compaction equipment), concrete mixers, stone crushers, pile driving equipment, working of hot mix bitumen plant, bitumen paver, floor polishing machines.

Estimating and Costing: Types of estimates (approximate, detailed), mode of measurements and rate analysis.

Contracts and Accounts: Types of engineering contracts, Tender and tender documents, payment, specifications.

LIC AE Syllabus 2020 (MEP- Engineers)

Engineering Mechanics: Resolution of forces, Equilibrium and Equilibrant, parallelogram law of forces, triangle law of forces, polygon law of forces and Lami’s theorem, couple and moment of a couple, condition for equilibrium of rigid body subjected to number of coplanar non-concurrent forces, definition of static friction, dynamic friction, derivation of limiting angle of friction and angle of repose, resolution of forces considering friction when a body moves on horizontal plane and inclined plane, calculation of moment of inertia and radius of gyration of : (a) I-Section (b) channel section (c) T-Section (d) L-Section (Equal & unequal lengths) (e) Z-Section (f) Built up sections (simple cases only), Newton’s laws of motion (without derivation), motion of projectile, D’Alembert’s principle, definition law of conservation of energy, law of conservation of momentum.

Material Science: Mechanical properties of engineering materials – tensile strength, compressive strength, ductility, malleability, hardness, toughness, brittleness, impact strength, fatigue, creep resistance. Classification of steels, mild steel and alloy steels. Importance of heat treatment. Heat treatment processes – annealing, normalizing, hardening, tempering, carburizing, nitriding and cyaniding.

Strength of Materials : Stress, strain, stress strain diagram, factor of safety, thermal stresses, strain energy, proof resilience and modules of resilience. Shear force and bending moment diagram – cant leaver beam, simply supported beam, continuous beam, fixed beam. Torsion in shafts and springs, thin cylinder shells.

Machining : Working principle of lathe. Types of lathes – Engine lathe – construction details and specifications. Nomenclature of single point cutting tool, geometry, tool signature, functions of tool angles. General and special operations – (Turning, facing, taper turning thread cutting, knurling, forming, drilling, boring, reaming, key way cutting), cutting fluids, coolants and lubricants. Introduction to shaper, slotter, plainer, broaching, milling and manufacture of gears, heat treatment process applied to gears.

Welding : Welding – Introduction, classification of welding processes, advantages and limitations of welding, principles of arc welding, arc welding equipment, choice of electrodes for different metals, principle of gas (oxy-acetylene) welding, equipment of gas welding, welding procedures (arc & gas), soldering and brazing techniques, types and applications of solders and fluxes, various flame cutting processes, advantages and limitations of flame cutting, defects in welding, testing and inspection modern welding methods, (submerged, CO2, atomic – hydrogen, ultrasonic welding), brief description of MIG & TIG welding.

Grinding & Finishing Process: Principles of metal removal by grinding, abrasives, natural and artificial, bonds and binding processes, vitrified, silicate, shellac rubber, grinding machines, classification: cylindrical, surface, tool & cutter grinding machine, construction details, relative merits, principles of centreless grinding, advantages & limitations of centre less grinding work, holding devices, wheel maintenance, balancing of wheels, coolants used, finishing by grinding, honing, lapping, super finishing, electroplating, basic principles – plating metals, applications, hot dipping, galvanizing tin coating, parkerising, anodizing, metal spraying, wire process, powder process and applications, organic coatings, oil base paint, lacquer base enamels, bituminous paints, rubber base coating.

Metrology: Linear measurement – Slip gauges and dial indicators, angle measurements, bevel protractor, sine bar, angle slip gauges, comparators (a) mechanical (b) electrical (c) optical (d) pneumatic. Measurement of surface roughness; methods of measurements by comparison, tracer instruments and by interferometry, collimators, measuring microscope, interferometer, inspection of machine parts using the concepts of shadow projection and profile projection.

Fluid Mechanics & Hydraulic Machinery: Properties of fluid, density, specific weight, specific gravity, viscosity, surface tension, compressibility capillarity, Pascal’s law, measurement of pressures, concept of buoyancy. Concept of Reynold’s number, pressure, potential and kinetic energy of liquids, total energy, laws of conservation, mass, energy and momentum, velocity of liquids and discharge, Bernoulli’s equation and assumptions, venturimeters, pitottube, current meters. Working principle & constructional details of centrifugal pump, efficiencies – manometric efficiency, volumetric efficiency, mechanical efficiency and overall efficiency, cavitation and its effect, working principle of jet & submersible pumps with line diagrams.

Industrial Management : Job analysis, motivation, different theories, satisfaction, performance reward systems, production, planning and control, relation with other departments, routing, scheduling, dispatching, PERT and CPM, simple problems. Materials in industry, inventory control model, ABC Analysis, Safety stock, re-order, level, economic ordering quantity, break even analysis, stores layout, stores equipment, stores records, purchasing procedures, purchase records, Bin card, Cardex, Material handling, Manual lifting, hoist, cranes, conveyors, trucks, fork trucks.

Thermal Engineering : Laws of thermo dynamics, conversion of heat into work vice versa , laws of perfect gases, thermo dynamic processes – isochoric, isobaric, isothermal hyperbolic, isentropic, polytrophic and throttling, modes of heat transfer, thermal conductivity, convective heat transfer coefficient, Stefan Boltzman law by radiation and overall heat transfer coefficient. Air standards cycles – Carnot cycle, Otto cycle, Diesel cycle, construction and working of internal combustion engines, comparison of diesel engine and petrol engine. Systems of internal combustion engine, performance of internal combustion engines. Air compressors their cycles refrigeration cycles, principle of a refrigeration plant.

Best Current Affairs for LIC AAO, AE Exam 2020

2020 Current Affairs PDF : Click Here

2019 Current Affairs PDF : Click Here

Static GK 2020 Notes PDF : Click Here

Static GK 2019 Notes PDF : Click Here

LIC AE Syllabus 2020 (Electrical Engineering)

Basic concepts: Concepts of resistance, inductance, capacitance, and various factors affecting them. Concepts of current, voltage, power, energy and their units.

Circuit law: Kirchhoff‘s law, Simple Circuit solution using network theorems.

Magnetic Circuit: Concepts of flux, mmf, reluctance, Different kinds of magnetic materials, Magnetic calculations for conductors of different configuration e.g. straight, circular, solenoidal, etc. Electromagnetic induction, self and mutual induction.

AC Fundamentals: Instantaneous, peak, R.M.S. and average values of alternating waves, Representation of sinusoidal wave form, simple series and parallel AC Circuits consisting of R.L. and C, Resonance, Tank Circuit. Poly Phase system – star and delta connection, 3 phase power, DC and sinusoidal response of R-Land R-C circuit.

Measurement and measuring instruments: Measurement of power (1 phase and 3 phase, both active and re-active) and energy, 2 wattmeter method of 3 phase power measurement. Measurement of frequency and phase angle. Ammeter and voltmeter (both moving oil and moving iron type), extension of range wattmeter, Multimeters, Megger, Energy meter AC Bridges. Use of CRO, Signal Generator, CT, PT and their uses. Earth Fault detection.

Electrical Machines: (a) D.C. Machine – Construction, Basic Principles of D.C. motors and generators, their characteristics, speed control and starting of D.C. Motors. Method of braking motor, Losses and efficiency of D.C. Machines. (b) 1 phase and 3 phase transformers – Construction, Principles of operation, equivalent circuit, voltage regulation, O.C. and S.C. Tests, Losses and efficiency. Effect of voltage, frequency and wave form on losses. Parallel operation of 1 phase /3 phase transformers. Auto transformers. (c) 3 phase induction motors, rotating magnetic field, principle of operation, equivalent circuit, torque-speed characteristics, starting and speed control of 3 phase induction motors. Methods of braking, effect of voltage and frequency variation on torque speed characteristics, Fractional Kilowatt Motors and Single Phase Induction Motors: Characteristics and applications.

Synchronous Machines: Generation of 3-phase e.m.f. armature reaction, voltage regulation, parallel operation of two alternators, synchronizing, control of active and reactive power. Starting and applications of synchronous motors.

Generation, Transmission and Distribution: Different types of power stations, Load factor, diversity factor, demand factor, cost of generation, inter-connection of power stations. Power factor improvement, various types of tariffs, types of faults, short circuit current for symmetrical faults. Switchgears and Protection: Rating of circuit breakers, Principles of arc extinction by oil and air, H.R.C. Fuses, Protection against earth leakage / over current, etc. Buchholz relay, Merz-Price system of protection of generators & transformers, protection of feeders and bus bars. Lightning arresters, various transmission and distribution

Estimation and costing: Estimation of lighting scheme, electric installation of machines and relevant IE rules. Earthing practices and IE Rules.

Utilization of Electrical Energy: Illumination, Electric heating, Electric welding, Electroplating, Electric drives and motors.

Basic Electronics: Working of various electronic devices e.g. P N Junction diodes, Transistors (NPN and PNP type), BJT and JFET. Simple circuits using these devices.

LIC AE Syllabus 2020 (Assistant Architect)

Architecture and Design
Visual composition in 2D and 3D; Principles of Art and Architecture; Organization of space; Architectural Graphics; Computer Graphics– concepts of CAD, BIM, 3D modeling and Architectural rendition; Programming languages and automation. Anthropometrics; Planning and design considerations for different building types; Site planning; Circulation- horizontal and vertical; Barrier free design; Space Standards; Building Codes; National Building Code.

Elements, construction, architectural styles and examples of different periods of Indian and Western History of Architecture; Oriental, Vernacular and Traditional architecture; Architectural developments since Industrial Revolution; Influence of modern art on architecture; Art nouveau, Eclecticism, International styles, Post Modernism, Deconstruction in architecture; Recent trends in Contemporary Architecture; Works of renowned national and international architects.

Building Materials, Construction and Management
Behavioral characteristics and applications of different building materials viz. mud, timber, bamboo, brick, concrete, steel, glass, FRP, AAC, different polymers, composites.

Building construction techniques, methods and details; Building systems and prefabrication of building elements; Principles of Modular Coordination; Estimation, specification, valuation, professional practice; Construction planning and equipments; Project management techniques e.g. PERT, CPM etc.

Building and Structures
Principles of strength of materials; Design of structural elements in wood, steel and RCC; Elastic and Limit State design; Structural systems in RCC and Steel; Form and Structure; Principles of Pre-stressing; High Rise and Long Span structures, gravity and lateral load resisting systems; Principles and design of disaster resistant structures.

Environmental Planning and Design
Ecosystem- natural and man-made ecosystem; Ecological principles; Concepts of Environmental Impact Analysis; Environmental considerations in planning and design; Thermal comfort, ventilation and air movement; Principles of lighting and illumination; Climate responsive design; Solar architecture; Principles of architectural acoustics; Green Building- Concepts and Rating; ECBC; Building Performance Simulation and Evaluation; Environmental pollution- types, causes, controls and abatement strategies.

Urban Design
Concepts and theories of urban design; Public Perception; Townscape; Public Realm; Urban design interventions for sustainable development and transportation; Historical and modern examples of urban design; Public spaces, character, spatial qualities and Sense of Place; Elements of urban built environment – urban form, spaces, structure, pattern, fabric, texture, grain etc; Principles, tools and techniques of urban design; Urban renewal and conservation; Site planning; Landscape design; Development controls – FAR, densities and building byelaws.

Urban Planning and Housing
Planning process; Types of plans – Master Plan, City Development Plan, Structure Plan, Zonal Plan, Action Area Plan, Town Planning Scheme, Regional Plan; Salient concepts, theories and principles of urban planning; Sustainable urban development; Emerging concepts of cities – Eco-City, Smart City, Transit Oriented Development (TOD), SEZ, SRZ etc.

Housing; Concepts, principles and examples of neighbourhood; Housing typologies; Slums; Affordable Housing; Housing for special areas and needs; Residential densities; Standards for housing and community facilities; National Housing Policies, Programs and Schemes.

Planning Techniques and Management
Tools and techniques of Surveys – Physical, Topographical, Landuse and Socioeconomic Surveys; Methods of non-spatial and spatial data analysis; Graphic presentation of spatial data; Application of G.I.S and Remote Sensing techniques in urban and regional planning; Decision support system and Land Information System.

Urban Economics; Law of demand and supply of land and its use in planning; Social, Economical and environmental cost benefit analysis; Techniques of financial appraisal; Management of Infrastructure Projects; Development guidelines such as URDPFI; Planning Legislation and implementation – Land Acquisition Act, PPP etc.; Local self-governance.

Services, Infrastructure and Transportation
Building Services: Water supply; Sewerage and drainage systems; Sanitary fittings and fixtures; Plumbing systems; Principles of internal and external drainage system; Principles of electrification of buildings; Intelligent Buildings; Elevators and Escalators – standards and uses; Air-Conditioning systems; Firefighting Systems; Building Safety and Security systems.

Urban Infrastructure – Transportation, Water Supply, Sewerage, Drainage, Solid Waste Management, Electricity and Communications.

Process and Principles of Transportation Planning and Traffic Engineering; Road capacity; Traffic survey methods; Traffic flow characteristics; Traffic analyses and design considerations; Travel demand forecasting; Land-use – transportation – urban form inter-relationships; Design of roads, intersections, grade separators and parking areas; Hierarchy of roads and level of service; Traffic and transport management and control in urban areas,; Mass transportation planning; Paratransits and other modes of transportation, Pedestrian and slow moving traffic planning; Intelligent Transportation Systems.

Principles of water supply and sanitation systems; water treatment; Water supply and distribution system; Water harvesting systems; Principles, Planning and Design of storm water drainage system; Sewage disposal methods; Methods of solid waste management – collection, transportation and disposal; Recycling and Reuse of solid waste; Power Supply and Communication Systems, network, design and guidelines.

Best Current Affairs for LIC AAO, AE Exam 2020

2020 Current Affairs PDF : Click Here

2019 Current Affairs PDF : Click Here

Static GK 2020 Notes PDF : Click Here

Static GK 2019 Notes PDF : Click Here

LIC AAO Syllabus 2020 (Chartered Accountants)

                                                 Fundamentals of Accounting

 

Theoretical Framework Bank Reconciliation Statement
Meaning and Scope of accounting Inventories
Accounting Concepts, Principles and Conventions Depreciation accounting
Accounting Standards – concepts, objectives, benefits Preparation of Final Accounts for Sole Proprietors
Accounting Policies Accounting for Special Transactions
Accounting as a measurement discipline – valuation principles, accounting estimates Partnership Accounts
Accounting Process Introduction to Company Accounts
                                                                    Mercantile Law
The Indian Contract Act , 1872 The Sale of Goods Act, 1930
The India Partnership Act, 1932
                                                                     General Economics
Micro Economics: Introduction Theory of Demand and Supply
Theory of Production and Cost Price Determination in Different Markets
Indian Economy – A Profile Select Aspects of Indian Economy
Economic Reforms in India Money and Banking

Quantitative Aptitude

Ratio and proportion, Indices, Logarithms Equations
Inequalities Simple and Compound Interest including annuity/Applications
Basic concepts of Permutations and Combinations Sequence and Series – Arithmetic and geometric progressions
Sets, Functions and Relations Limits and Continuity – Intuitive Approach
Basic concepts of Differential and Integral Calculus (excluding trigonometric functions) Statistical description of data
Measures of Central Tendency and Dispersion Correlation and Regression
Probability and Expected Value by Mathematical Expectation Theoretical Distributions
Sampling Theory Index Numbers

ICAI Intermediate syllabus:

Accounting Business Law, Ethics and Communication
Cost Accounting and Financial Management Taxation
Advanced Accounting Auditing and Assurance
Information Technology and Strategic Management

ICAI Final Syllabus:

Group I Group II
Financial Reporting Advanced Management Accounting
Strategic Financial Management Information Systems Control and Audit
Advanced Auditing and Professional Ethics Direct Tax Laws
Corporate and Allied Laws Indirect Tax Laws

Best Current Affairs for LIC AAO, AE Exam 2020

2020 Current Affairs PDF : Click Here

2019 Current Affairs PDF : Click Here

Static GK 2020 Notes PDF : Click Here

Static GK 2019 Notes PDF : Click Here

LIC AAO Syllabus 2020 (Legal)

  1. Constitutional law of India : Preamble, Fundamental rights and duties, directive principles of state policy, Judiciary, Executive, Union State Legislative Relations, Emergency provisions, Amendment of the constitution, Writ jurisdiction
  2. Legal Theory : Nature and sources of Law, Natural law theory, sociological jurisprudence, Theories of punishment, Rights and duties, Concepts of possession and ownership
  3. Public International Law : Nature of International Law and its relationship with Municipal Law, Recognition of States & Governments, Settlement of International Disputes, Human Rights
  4. Family Law : Concepts of family law, Sources of Family law in India, Marriage and Dissolution of Marriage, Divorce, Maintenance, Matrimonial Remedies, Uniform civil code
  5. Law of Contracts : General Principles : Essentials of a valid contract, offer, acceptance and consideration, capacity to contract – Minor’s contract, Elements vitiating contract – mistake, fraud, misrepresentation, public policy, coercion, undue influence, frustration of contract, Remedies for breach of contract – Damages.
  6. Laws of Torts : Foundation of Tortuous Liability, General Defences to an action of Torty, Vicarious liability, Remoteness of Damages, Contributory Negligence, Absolute and Strict Liability.
  7. Laws of Crimes : General Principles : Nature and Definition of offence, General Exceptions, Common Intention and Common Object, Criminal Attempt, Conspiracy and Abetment, Offences against women
  8. Labour Laws : Concepts, Industrial Disputes, Trade Unions – Rights and Immunities of Registered Trade Unions, Registration and its advances, Method of settlement of industrial disputes, Strikes and lockouts, Instrument of collective bargaining, Retrenchment, Lay offs, Closures and arbitration proceedings, The Contract Labour (Regulation & Abolition) Act
  9. Environmental laws : Environmental pollution, legislative measures for prevention and control of environmental pollution in India – Air and Water Pollution and General protection of environment, International development for protection of Environmental Pollution, Remedies for Environmental Protection – Civil, Criminal and Constitutional, Importance of Forest and Wildlife in protecting environment, Environmental impact assessment and control of hazardous wastes.
  10. Business Legislations : Partnership Act – nature and essentials of partnership, mutual rights and liabilities of partners, advantages of registration of firms, The sale of goods act, Negotiable Instruments Act, Company Law – Role of Directors, Doctrines of Indoor Management and Ultra Vires, Law pertaining to land acquisitions, Global Trade Regimes under International Law.
  11. Knowledge of Arbitration Act, Taxation Law, and other Social Welfare Legislation.
  12. Civil Liability Nuclear Damage(CLND) Act.2010

LIC AAO Syllabus 2020 (IT)

Verbal Ability: English grammar, sentence completion, verbal analogies, word groups, instructions, critical reasoning and verbal deduction.
Numerical Ability: Numerical computation, numerical estimation, numerical

Discrete Mathematics: Propositional and first order logic. Sets, relations, functions, partial orders and lattices. Groups. Graphs: connectivity, matching, coloring. Combinatorics: counting, recurrence relations,generating functions.

Linear Algebra: Matrices, determinants, system of linear equations, eigenvalues and eigen vectors, LU decomposition.

Calculus: Limits, continuity and differentiability. Maxima and minima. Mean value theorem. Integration.

Probability: Random variables. Uniform, normal, exponential, poisson and binomial distributions. Mean, median, mode and standard deviation. Conditional probability and Bayes theorem.

Boolean algebra. Combinational and sequential circuits. Minimization. Number representations and computer arithmetic (fixed and floating point).

Machine instructions and addressing modes. ALU, data‐path and control unit. Instruction pipelining. Memory hierarchy: cache, main memory and secondary storage; I/O interface (interrupt and DMA mode).

Programming in C. Recursion. Arrays, stacks, queues, linked lists, trees, binary search trees, binary heaps, graphs.

Searching, sorting, hashing. Asymptotic worst case time and space complexity. Algorithm design techniques: greedy, dynamic programming and divide‐and‐conquer. Graph search, minimum spanning trees, shortest paths.

Regular expressions and finite automata. Context-free grammars and push-down automata. Regular and contex-free languages, pumping lemma. Turing machines and undecidability.

Lexical analysis, parsing, syntax-directed translation. Runtime environments. Intermediate code generation.

Processes, threads, inter‐process communication, concurrency and synchronization. Deadlock. CPU scheduling. Memory management and virtual memory. File systems.

ER‐model. Relational model: relational algebra, tuple calculus, SQL. Integrity constraints, normal forms. File organization, indexing (e.g., B and B+ trees). Transactions and concurrency control.

Concept of layering. LAN technologies (Ethernet). Flow and error control techniques, switching. IPv4/IPv6, routers and routing algorithms (distance vector, link state). TCP/UDP and sockets, congestion control. Application layer protocols (DNS, SMTP, POP, FTP, HTTP). Basics of Wi-Fi. Network security: authentication, basics of public key and private key cryptography, digital signatures and certificates, firewalls.

Best Current Affairs for LIC AAO, AE Exam 2020

2020 Current Affairs PDF : Click Here

2019 Current Affairs PDF : Click Here

Static GK 2020 Notes PDF : Click Here

Static GK 2019 Notes PDF : Click Here

LIC AAO, AE Official Advertisement PDF Download

LIC AAO, AE Online Form: Click Here

List of Exam Centres For Prelims & Mains Exam: Click Here

Follow us on- Facebook | YouTube | Telegram | Instagram | Pinterest

Prashant Chaturvedi

Spread the love

Leave a Reply

avatar
  Subscribe  
Notify of
Please contact admin - prashantchaturveditutorials[AT]gmail[dot]com